View Single Post
  #8  
Old 04-01-04, 07:54 PM
RobM's Avatar
RobM RobM is offline
Administrator
 
Join Date: May 2003
Location: Nottingham, England
Posts: 352
Default

Camilla,
I rescued an MDF panel which had warped slightly more than yours.
I applied more gesso to the reverse then placed the panel on two pieces of say 10 to 20mm strips of wood positioned at the far ends of the panel and then place a weight in the centre of the panel. This would then provide a counter forced warping. Leave the panel to dry thoroughly and then remove the weight. It worked for me.
Rob